Tractorpoint Login

print < Tractorpoint Login

Search for =

Topic

$I have a b1700 with a 4672 hoe. The b1700 is the same platform as the b2400.( the predesesser to your machine) You must remember that these are small backhoes. With a little finness you can do alot of digging, BUT BUT BUT you can also do alot of damage to your machine if you are not careful. I have never actually seen a tractor broken in half,but I have had my 1700 completly supported by the backhoe(not good) in a fraction of a second when I first got the machine. If your going to use the BH for heavy and continuous work I would reccommend a different combination, If on the other hand your going to use the BH yourself(not lending the machine out) and you have patients the 4672 is a fine unit. I have done over 400 feet of drainage etc. and a few very large stumps(time consuming)and have been very pleased. I have also called people in with large equipment to pull stumps out in bulk, saving the 4672 for the work it was intended for. I believe the 4672 requires Partial subframe (MMM compatable) and a heavy duty TOP LINK BRACKET Good Luck Doug T$ Kubota 4672 back hoe experience HELP
Kubota Tractors
Replies 2 Post by doug T